How to Fix HDMI Port on PS4: Easy Tips and Solutions

If you’re experiencing problems with your HDMI port on your PS4, don’t worry – you’re not alone. Many people are reporting issues with the HDMI port on their console.

In this blog post, we will provide some easy tips and solutions that should help you fix the problem. We will also provide a few workarounds in case the solutions listed below do not work for you.

Let’s get started!

How to Fix HDMI Port on PS4?

This is a common issue that many people experience.

  • The first thing you should do is check the HDMI port for any physical damage. If there is any visible damage, you will need to replace the HDMI port. However, if the port looks fine, proceed to the next step.
  • Next, try restarting your PS4 and see if that fixes the problem.
  • If not, try unplugging the HDMI cable from both the PS4 and TV/monitor and plugging it back in.
  • Make sure you plug it in all the way and that it’s snugly connected.

If you’re still having problems with your HDMI port, try using a different HDMI cable. Sometimes, damaged or old cables can cause problems with connections.

If you have a spare HDMI cable lying around, give it a try.

Finally, if none of the above solutions work, you may need to send your PS$ in for repairs. We understand that this is not ideal, but sometimes it’s the only way to fix the problem. We hope that this blog post has helped you fix your HDMI port issue.

Read more: How to Charge PS4 Controller Without PS4?

How to fix HDMI port PS4 not working?

There are a couple of things you can try if you’re having problems getting a signal on your PS4. First, check to make sure that your HDMI cable is properly plugged into the TV and the console.

If that doesn’t work, try adjusting the resolution on your TV. Most TVs have an auto-detect feature that will automatically choose the best resolution for the device you’re using, but sometimes it needs a little help.

Try changing the resolution to 1080p or 720p and see if that fixes the problem.

How to fix PS4 HDMI port bent pins?

There are a few things you can do to try to fix bent PS4 HDMI port pins. If the pins are only slightly bent, you might be able to straighten them using a small pair of needle-nose pliers. However, if they are severely bent, you might need to take the console apart and use a tiny screwdriver to gently push the pins back into place.

If that doesn’t work, you can also try using a hairdryer on low heat to help straighten them out.

  • Just be careful not to apply too much heat or hold the dryer in one spot for too long, or you could end up damaging the port permanently.

PS4 Slim HDMI port replacement

There’s no real DIY guide for this, as it’s a bit more complicated than just swapping out a port. You’ll likely need to take the entire console apart in order to get to the HDMI port.

And then you’ll need to solder on a new connector. If you’re not comfortable doing this yourself, you can always take it to a professional.

Leave a Comment

Your email address will not be published. Required fields are marked *